Leírás
The Walksnail Avatar HD Nano Camera / Mini 1S VTX Kit features a nano digital camera, antenna, and mini VTX that works with HD Goggles such as the Walksnail Avatar and Fat Shark HD Dominator. This mini HD VTX combo has lower latency than the competitor at an average of 22ms, with an onboard DVR, 5.8GHz frequency, 8Gb internal storage, and a switchable aspect ratio.
Features
- Lower latency than the competitor at an average of 22ms
- 6.8g Lightweight Mini VTX great for the 75x Quad
- Walksnail Avatar Mini 1S VTX Module
- Walksnail Avatar Nano Camera
- Built-in 8Gb Internal Storage
- 1080p Screen Resolution
- Switchable Aspect Ratio
- Walksnail IPEX Antenna
- 5.8GHz Frequency
- Onboard DVR
- Canvas Mode
- 170° FOV
- 3.1V-13V
Specifications
AVATAR HD NANO CAMERA
- Resolution: 1080p 60FPS / 720P 120FPS / 720P 60FPS
- Aspect Ration: 16/9 and 4/3 Switchable
- Minimum Illumination: 0.001Lux
- Shutter Style: Rolling Shutter
- Dimensions: 14x14x17mm
- Cable Length: 90mm
- Image Sensor: 1/27"
- Field Of View: 170°
- Aperture: F 2.0
- Lens: 2.1mm
- Weight: 3.5g
AVATAR MINI 1S VTX MODULE
- Transition Power: FCC<25.5dBm / CE <14dBm / SRRC <20dBm / MIC <25dB
- I/O Interface: JST1.0 x 6 (Power In) to JST1.0 x 4 (USB)
- Operational Frequency: 5.725-5.850GHz
- Operating Temperature: -20° to 40°c
- Supported FC Firmware: Betaflight
- Video Resolution: 1080p / 720p
- Dimensions: 33x33x6.5mm
- Antenna Connector: IPEX
- Bitrate: 25mbps/50mbps
- Mounting: 25.5x25.5mm
- Latency: 22ms Average
- Internal Storage: 8GB
- Input Voltage: 3.1-5V
- OSD: Canvas Mode
- Weight: 6.8g
- Channels: 8
WALKSNAIL AVATAR VTX ANTENNA
- Radiation Efficiency: >= 98%
- Bandwidth: 5.6-5.9GHz
- Gain: 2dBi Average
- Polarization: LHCP
- Connector: IPEX
- Length: 90mm
- VSWR: <=1.4
- Weight: 1.5g
Csomag tartalma
1x Walksnail Avatar HD Nano Camera w/ Avatar Mini 1S VTX
1x Walksnail Avatar IPEX Antenna
1x 6-Pin Power Cable
2x M2 4mm Screws
1x 4-Pin USB Cable
Vélemények
1 értékelés
Írja meg véleményét!
József
|
Igazolt vásárlás
2023. 04. 30.
Kérésemre könnyebbre átalakított 1s Walksnail kitet kaptam: a processzort hűtő fém kupak és a kamera hátlapja le lett szedve. Kösz!
Kitűnően működik, egy 75-ös whoop-ot építettem belőle. Nem melegszik túl, persze bekapcsolás után majdnem azonnal indítom a motorokat. A kb. 2g súly csökkenés után a gép akku nélkül kevesebb, mint 30g. Mivel az előző változatban egy crash után a propeller elnyírta a kamera kábelt, új - a drótot védő - kamera tartót terveztem a kis géphez.
Kép: https://ibb.co/gPhd257
At my request, I received a lighter modified 1s Walksnail kit: the metal cap cooling the processor and the back of the camera were removed. Dirt!
It works great, I built a 75 whoop out of it. It doesn't get too hot, of course I start the engines almost immediately after switching on. The approx. After a 2g weight reduction, the machine without battery is less than 30g. Since the propeller cut the camera cable after a crash in the previous version, I designed a new camera holder for the small machine - protecting the wire.
Image: https://ibb.co/gPhd257
Kitűnően működik, egy 75-ös whoop-ot építettem belőle. Nem melegszik túl, persze bekapcsolás után majdnem azonnal indítom a motorokat. A kb. 2g súly csökkenés után a gép akku nélkül kevesebb, mint 30g. Mivel az előző változatban egy crash után a propeller elnyírta a kamera kábelt, új - a drótot védő - kamera tartót terveztem a kis géphez.
Kép: https://ibb.co/gPhd257
At my request, I received a lighter modified 1s Walksnail kit: the metal cap cooling the processor and the back of the camera were removed. Dirt!
It works great, I built a 75 whoop out of it. It doesn't get too hot, of course I start the engines almost immediately after switching on. The approx. After a 2g weight reduction, the machine without battery is less than 30g. Since the propeller cut the camera cable after a crash in the previous version, I designed a new camera holder for the small machine - protecting the wire.
Image: https://ibb.co/gPhd257