Leírás
Fixed
- Add I2C function
- When you connect the USB, the receiver and OSD settings can be saved
- Increase the pad area
- LED signal selection (when Mamba Led sys avaiable)
- BEC short circuit protection
- TVS instant high voltage protection 30V
Update
- Upgrade the anti-interference cable
- Use Typec(Most)
- The pad area of the Mini flight controller (20×20) increased by 140%
Added
- Add self-recovery insurance to the receiver's 5V power supply.
- Increase the camera VCC power supply pad.
- The standard flight controller (30.5×30.5) adds a spare pad.
- Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference.
FC Specifications
MAMBA Basic F405MK3 lite
MCU: 168MHz STM32F405RGT6
GYRO: MPU6000
Barometer: No
OSD: Yes
Blackbox: 16M Flash Memory
Uarts: 5Set
ESC Soft: Dshot300/600
ESC Telemetry: Yes
Power Led: Yes
LED Controller: BF LED(4 Set 2812 LED)
S/F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 3~6S Lipo (12.6~25.2V)
TVS Protection: Yes
BEC:3.3V 0.5A& 5V 3A & 9V 3A
MOUNTING: 30.5mm, M3
ESC Specifications
INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
CONTINUE CURRENT:50A×4
BURST CURRENT:55A (10S)
BEC: No
Target:BLHeli_S CH40
SOFT: Dshot300/600
TVS Protection: Yes
MOUNTING: 30.5mm/M3
Paraméterek
ESC firmware | BLHeli S |
Fekete doboz | belső 16MB |
FC CPU | STM32F405 |
OSD | igen |
UARTS | 5 |
Beépítési méret | 30,5x30,5 mm (mini) |
MPU | MPU6000 |
Állandó áramerősség | 50 A |
Támogatott cellaszám | 3-6 cella (11.1V-22.2V) |
Súly | 30 g |
Csomag tartalma
1 x High-Frequency 470uF/35V
2 x 8pin sh1.0
2 x 12AWG 100mm
AMASS Original XT60
2 x 8pin sh1.0
2 x 12AWG 100mm
AMASS Original XT60
Vélemények
Erről a termékről még nem érkezett vélemény.
Írja meg véleményét!